[1]郑立夫,张羽祺,方川,等.基于加速器的锥形束CT系统机械精度的精确测量方法及其实现[J].中国医学物理学杂志,2020,37(2):168-173.[doi:DOI:10.3969/j.issn.1005-202X.2020.02.007]
 ZHENG Lifu,ZHANG Yuqi,FANG Chuan,et al.Method for detecting the mechanical precision of cone-beam computed tomography device based on accelerator and its implementation[J].Chinese Journal of Medical Physics,2020,37(2):168-173.[doi:DOI:10.3969/j.issn.1005-202X.2020.02.007]
点击复制

基于加速器的锥形束CT系统机械精度的精确测量方法及其实现()
分享到:

《中国医学物理学杂志》[ISSN:1005-202X/CN:44-1351/R]

卷:
37
期数:
2020年第2期
页码:
168-173
栏目:
医学放射物理
出版日期:
2020-03-03

文章信息/Info

Title:
Method for detecting the mechanical precision of cone-beam computed tomography device based on accelerator and its implementation
文章编号:
1005-202X(2020)02-0168-06
作者:
郑立夫1张羽祺2方川2葛云2陈颖2黄晓林2
1.北京市医疗器械检验所, 北京 101111; 2.南京大学电子科学与工程学院, 江苏 南京 210023
Author(s):
ZHENG Lifu1 ZHANG Yuqi2 FANG Chuan2 GE Yun2 CHEN Ying2 HUANG Xiaolin2
1. Beijing Institute of Medical Device Testing, Beijing 101111, China; 2. School of Electronic Science and Engineering, Nanjing University, Nanjing 210023, China
关键词:
锥形束CT红外双目相机定位小球机械等中心影像等中心
Keywords:
Keywords: cone-beam computed tomography infrared binocular camera positioning ball mechanical isocenter imaging isocenter
分类号:
R318
DOI:
DOI:10.3969/j.issn.1005-202X.2020.02.007
文献标志码:
A
摘要:
目的:设计并实现一种锥形束CT(CBCT)机械精度的检测方法,可对CBCT的机械性能参数进行精确测量和分析(重复性在0.5 mm以内,测量误差在0.5 mm内,耗时数分钟)。方法:系统硬件包括双目红外相机、定位小球、注册笔和水平注册仪。双目红外相机可输出定位小球中心的空间坐标,利用定位小球中心位置坐标可计算出加速器机械等中心坐标,利用CBCT拍出的定位小球图像可计算出CBCT影像中心与加速器机械等中心的偏差,利用注册笔可计算出CBCT平板角度偏差。结果:在某医院加速器配备的CBCT上运用本方法进行3次测试和分析,得到加速器机械等中心坐标、CBCT影像等中心坐标、两等中心距离误差和CBCT平板打开垂直度等数据。结论:本研究提出的检测CBCT机械精度的方法操作过程较简单,结果精准,可重复性高,将复杂的质控过程数字化、自动化和简单化,给CBCT的日常质量检测带来非常大的便利,也为相关技术人员以及医护人员在临床上安全应用CBCT提供指导。 【关键词】锥形束CT;红外双目相机;定位小球;机械等中心;影像等中心
Abstract:
Abstract: Objective To design and implement a mechanical precision detection method for measuring and analyzing the mechanical parameters of cone-beam computed tomography (CBCT) device, with the repeatability within 0.5 mm, measurement error within 0.5 mm and time consumption of a few minutes. Methods The system hardware included infrared binocular camera, positioning ball, registration pen and horizontal registered instrument. The infrared binocular camera output the central spatial coordinates of the positioning ball. According to the coordinates, the mechanical isocenter coordinate of accelerator was calculated. Moreover, the deviation between the mechanical isocenter of accelerator and the imaging isocenter of CBCT device was calculated based on the CBCT image of positioning point; and then registration pen was used to calculate CBCT flat angle errors. Results The proposed method was used to conduct 3 experiments on a CBCT device in a hospital to obtain the mechanical isocenter coordinate of accelerator, CBCT imaging isocenter coordinate, distance deviation between two isocenters, and CBCT flat angle errors, etc. Conclusion This proposed method for detecting the mechanical precision of CBCT device has the advantages of simple operation, accurate results and high repeatability, digitizing, automating and simplifying complicated quality control processes, which bring great convenience to daily quality inspection of CBCT device and provide guidance for relevant technical personnel and medical staff in the safe application of CBCT in clinic.

相似文献/References:

[1]张俊俊,杨 振,柏朋刚,等.运动模体中靶区长度与锥形束CT扫描速度的相关性[J].中国医学物理学杂志,2015,32(02):259.[doi:10.3969/j.issn.1005-202X.2015.02.025]
[2]张一戈,邱小平,陈维军,等.基于图像引导技术对头颈部肿瘤临床摆位误差的剂量学影响[J].中国医学物理学杂志,2015,32(01):25.[doi:10.3969/j.issn.1005-202X.2015.01.007]
[3]李 毅,李文荣,苏 进,等.基于CBCT非小细胞肺癌外放边界研究[J].中国医学物理学杂志,2014,31(04):5006.[doi:10.3969/j.issn.1005-202X.2014.04.008]
[4]翁邓胡,王 建,尹中明,等.基于锥形束CT研究肺癌图像引导放疗的内靶区外放边界值[J].中国医学物理学杂志,2014,31(04):5012.[doi:10.3969/j.issn.1005-202X.2014.04.009]
[5]查元梓,吴晔明,陆冬青,等.应用锥形束CT研究儿童神经母细胞瘤放射治疗的摆位误差[J].中国医学物理学杂志,2014,31(05):5128.[doi:10.3969/j.issn.1005-202X.2014.05.007]
[6]沈奕晨,聂生东.锥形束CT与螺旋CT图像配准算法及其在放疗中的应用[J].中国医学物理学杂志,2014,31(05):5151.[doi:10.3969/j.issn.1005-202X.2014.05.013]
[7]林俊华,魏贤顶,孔旭东,等.kV级锥形束CT在图像引导放疗中的应用[J].中国医学物理学杂志,2014,31(05):5157.[doi:10.3969/j.issn.1005-202X.2014.05.014]
[8]周 琼,周剑良,张一戈,等.基于锥形束CT肺癌放射治疗两种体位固定技术摆位误差的研究[J].中国医学物理学杂志,2014,31(06):5258.[doi:10.3969/j.issn.1005-202X.2014.06.008]
[9]周永强,金献测,易金玲,等.锥形束CT的验收与QA探讨[J].中国医学物理学杂志,2013,30(01):3854.[doi:10.3969/j.issn.1005-202X.2013.01.005]
[10]刘浩,白靖平,李公平,等.锥形束CT图象引导放疗的应用性测试[J].中国医学物理学杂志,2013,30(01):3877.[doi:10.3969/j.issn.1005-202X.2013.01.010]

备注/Memo

备注/Memo:
【收稿日期】2019-09-15 【基金项目】北京市医疗器械检验所科研发展基金 【作者简介】郑立夫,高级工程师,研究方向:放射诊断与治疗类产品检测,E-mail: zhenglifu@bimt.org.cn
更新日期/Last Update: 2020-03-03