[1]王芸,王枭冶,米雷,等.锁定接骨板外置治疗42A3型骨折的生物力学分析[J].中国医学物理学杂志,2023,40(7):909-916.[doi:DOI:10.3969/j.issn.1005-202X.2023.07.019]
　WANG Yun,WANG Xiaoye,et al.Biomechanical analysis of external locking plate in the treatment of type 42A3 fracture[J].Chinese Journal of Medical Physics,2023,40(7):909-916.[doi:DOI:10.3969/j.issn.1005-202X.2023.07.019]
点击复制

锁定接骨板外置治疗42A3型骨折的生物力学分析()
分享到：

《中国医学物理学杂志》[ISSN:1005-202X/CN:44-1351/R]

卷:
40卷
期数:
2023年第7期
页码:
909-916
栏目:
生物材料与力学
出版日期:
2023-07-15

文章信息/Info

Title:
Biomechanical analysis of external locking plate in the treatment of type 42A3 fracture
文章编号:
1005-202X（2023）07-0909-08
作者:
王芸1; 2; 王枭冶1; 2; 米雷1; 2; 张冠军3; 张玲4; 杨韵琪1; 2; 方诗涛1; 2
1.湖南中医药大学临床医学院， 湖南 长沙 410208； 2.湖南省脑科医院（湖南省第二人民医院）骨科中心， 湖南 长沙 410021； 3.湖南大学机械与运载工程学院， 湖南 长沙 410082； 4.中南大学湘雅三医院护理部， 湖南 长沙 410013
Author(s):
WANG Yun1;  2;  WANG Xiaoye1;  2;  MI Lei1;  2;  ZHANG Guanjun3;  ZHANG Ling4;  YANG Yunqi1;  2;  FANG Shitao1;  2
1. School of Clinical Medicine, Hunan University of Chinese Medicine, Changsha 410208, China 2. Orthopedic Center, Hunan Brain Hospital (Hunan Second Peoples Hospital), Changsha 410021, China 3. School of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China 4. Nursing Department, Xiangya Third Hospital, Central South University, Changsha 410013, China
关键词:
胫骨骨折; 有限元分析; 生物力学; 锁定接骨板
Keywords:
Keywords: tibial fracture finite element analysis biomechanics locking plate
分类号:
R318
DOI:
DOI:10.3969/j.issn.1005-202X.2023.07.019
文献标志码:
A
摘要:
目的：构建锁定接骨板外置治疗胫骨干横形骨折（AO-OTA分型：42A3型）的模型，运用有限元分析的方法，分析不同骨折断端分离间隙时，接骨板、螺钉及胫骨的应力及分布情况，并为该治疗方案提供理论依据。方法：获得1名健康志愿者左侧胫骨的CT扫描DICOM图像，使用Mimics 21.0软件、Geomagic Studio 2014软件、SolidWorks软件、Hypermesh14.0软件、MSC.Patran 2019软件和MSC.Nastran 2019软件建立接骨板外置治疗不同骨折分离间隙的42A3型骨折有限元模型，并通过有限元分析胫骨、接骨板及螺钉的最大应力值及分布情况。结果：在0.2~2.0 mm分离间隙下，随着骨折断端分离间隙增大，力加载终止时刻及力加载全程胫骨、接骨板、螺钉最大应力值均呈上升趋势；且接骨板最大应力值>螺钉最大应力值>胫骨最大应力值；接骨板最大应力值在接骨板第3、4、5板孔附近；螺钉最大应力值在第3螺钉尾部；胫骨最大应力值出现在骨折断面处；胫骨、接骨板、螺钉力加载全程最大应力值均大于其自身力加载终止时刻最大应力值。结论：当42A3型骨折断端分离间隙小于2.0 mm时，锁定接骨板外置治疗42A3型骨折的生物力学可达到固定强度，该治疗方式可供选择。
Abstract:
Abstract: Objective To establish a finite element model of external locking plate for the treatment of tibial transverse fractures (AO-OTA: 42A3), and to analyze the stress distribution of the plate, screw and tibia in different fracture gaps, thereby providing a preliminary theoretical basis for the therapeutic scheme. Methods The DICOM file of CT scanning data of the left tibia in a healthy volunteer was obtained. Mimics 21.0 software, GeomagicStudio2014 software, SolidWorks software, Hypermesh 14.0 software, MSC.Patran 2019 software and MSC. Nastran 2019 software were used to establish the finite element models of type 42A3 fractures with different fracture gaps treated with external locking plate. The maximum stress values and distributions of tibia, plate and screw were analyzed with finite element method. Results When the fracture gaps was 0.2-2.0 mm,with the fracture gaps increasing, the maximum stress values of tibia, plate and screw were upward at the end of force loading and during the loading. The bone plate had the maximum stress value, followed by screw and tibia. The maximum stress of the locking plate was near the third, fourth, and fifth holes of the plate the maximum stress value of the screw occurred at the tail of the third screw and the maximum stress value of the tibia appeared at the fracture section. The maximum stress values of tibia, plate and screw during the loading were all greater than the maximum stress values at the end of the loading. Conclusion When the fracture gap is less than 2.0 mm, the external locking plate for the treatment of type 42A3 fractures can achieve sufficient biomechanical strength, which makes it be an alternative therapeutic option.

相似文献/References:

[1]赵亚丽,戴培山,李 玲,等.人眼有限元建模与仿真的研究进展[J].中国医学物理学杂志,2015,32(02):203.[doi:10.3969/j.issn.1005-202X.2015.02.011]
[2]戚琳,唐晶华,赵震锦,等.颌间Ⅲ类牵引对颞下颌关节区应力分布和位移影响的三维有限元研究[J].中国医学物理学杂志,2013,30(02):4059.[doi:10.3969/j.issn.1005-202X.2013.02.023]
[3]张爱华,刘宗福,林冬梅,等.基于有限元分析的脉搏形态三维重构[J].中国医学物理学杂志,2015,32(04):458.[doi:doi:10.3969/j.issn.1005-202X.2015.04.002]
　[J].Chinese Journal of Medical Physics,2015,32(7):458.[doi:doi:10.3969/j.issn.1005-202X.2015.04.002]
[4]林娟颖,刘晓颖,吕建成,等.上颌第二磨牙生物力学有限元分析[J].中国医学物理学杂志,2017,34(8):832.[doi:DOI:10.3969/j.issn.1005-202X.2017.08.016]
[5]吴山山,石更强,武杰,等. 腹腔镜手术器械分离钳的结构优化设计[J].中国医学物理学杂志,2017,34(10):1027.[doi:DOI:10.3969/j.issn.1005-202X.2017.10.012]
[6]韩梁,韩宝三,宋成利,等.腹腔镜抓钳的力学性能[J].中国医学物理学杂志,2020,37(1):122.[doi:DOI:10.3969/j.issn.1005-202X.2020.01.022]
　HAN Liang,HAN Baosan,SONG Chengli,et al.Mechanical properties of laparoscopic grasper[J].Chinese Journal of Medical Physics,2020,37(7):122.[doi:DOI:10.3969/j.issn.1005-202X.2020.01.022]
[7]胡元斌,周岳来,李永顺,等.有限元分析髓芯减压并同种异体植骨治疗股骨头缺血性坏死的生物力学改变[J].中国医学物理学杂志,2020,37(2):243.[doi:DOI:10.3969/j.issn.1005-202X.2020.02.019]
　HU Yuanbin,ZHOU Yuelai,LI Yongshun,et al.Biomechanical changes of avascular necrosis of the femoral head treated by core decompression and allogeneic bone grafting: a finite element analysis[J].Chinese Journal of Medical Physics,2020,37(7):243.[doi:DOI:10.3969/j.issn.1005-202X.2020.02.019]
[8]莫诒向,邓羽平,黄文华,等.腓骨高位截骨术对胫骨平台的生物力学分析[J].中国医学物理学杂志,2020,37(5):644.[doi:10.3969/j.issn.1005-202X.2020.05.022]
　MO Yixiang,DENG Yuping,et al.Effects of proximal fibular osteotomy on tibial plateau: a biomechanical analysis[J].Chinese Journal of Medical Physics,2020,37(7):644.[doi:10.3969/j.issn.1005-202X.2020.05.022]
[9]田云鹏,闫士举,宋成利,等.钳齿形貌对腹腔镜夹钳安全性的影响[J].中国医学物理学杂志,2020,37(6):774.[doi:DOI:10.3969/j.issn.1005-202X.2020.06.022]
　TIAN Yunpeng,YAN Shiju,SONG Chengli,et al.Effects of teeth profile on the safety of laparoscopic grasper[J].Chinese Journal of Medical Physics,2020,37(7):774.[doi:DOI:10.3969/j.issn.1005-202X.2020.06.022]
[10]曹宏健,刘志成,钱秀清.视乳头的结构和力学特性对筛板变形的影响[J].中国医学物理学杂志,2020,37(10):1317.[doi:DOI:10.3969/j.issn.1005-202X.2020.10.018]
　CAO Hongjian,LIU Zhicheng,QIAN Xiuqing,et al.Effects of mechanical properties and structure of optic nerve head on the deformation of lamina cribrosa[J].Chinese Journal of Medical Physics,2020,37(7):1317.[doi:DOI:10.3969/j.issn.1005-202X.2020.10.018]

备注/Memo

备注/Memo:
【收稿日期】2023-01-26 【基金项目】湖南省卫生计生委科研基金（B2017108） 【作者简介】王芸，研究方向：骨外科学，E-mail: 373136099@qq.com 【通信作者】王枭冶，主任医师，研究方向：创伤骨科，E-mail: 330243@hnucm.edu.cn
更新日期/Last Update: 2023-07-15