[1]杜凡宇,蒋曦贤,邓岚之,等.基于最小二乘法的X线球管管电流校准优化方法[J].中国医学物理学杂志,2023,40(4):456-462.[doi:DOI:10.3969/j.issn.1005-202X.2023.04.010]
　DU Fanyu,JIANG Xixian,DENG Lanzhi,et al.Optimization method of X-ray bulb tube current calibration based on least square fitting[J].Chinese Journal of Medical Physics,2023,40(4):456-462.[doi:DOI:10.3969/j.issn.1005-202X.2023.04.010]
点击复制

基于最小二乘法的X线球管管电流校准优化方法()
分享到：

《中国医学物理学杂志》[ISSN:1005-202X/CN:44-1351/R]

卷:
40卷
期数:
2023年第4期
页码:
456-462
栏目:
医学信号处理与医学仪器
出版日期:
2023-04-25

文章信息/Info

Title:
Optimization method of X-ray bulb tube current calibration based on least square fitting
文章编号:
1005-202X（2023）04-0456-07
作者:
杜凡宇; 蒋曦贤; 邓岚之; 冯小洁
川北医学院医学影像学院， 四川 南充 637000
Author(s):
DU Fanyu;  JIANG Xixian;  DENG Lanzhi;  FENG Xiaojie
School of Medical Imaging, North Sichuan Medical College, Nanchong 637000, China
关键词:
最小二乘法; X线球管; 管电流; 多项式拟合; 分段平移
Keywords:
Keywords: least square method X-ray bulb tube tube current polynomial fitting piecewise translation
分类号:
R318；TP 211.7
DOI:
DOI:10.3969/j.issn.1005-202X.2023.04.010
文献标志码:
A
摘要:
医疗X线类设备球管中电流漂移问题会影响影像构建质量和患者检查的准确性，工程中一般采用人为多次测量校准，准确度低且成本花费巨大。本研究提出通过控制变量的方法测绘出新、旧球管的灯丝特性曲线，根据管电流多项式的变化规律，采用Matlab最小二乘法多项式拟合方法，利用实测的少数点值和多项式分段平移方法对球管所有曝光点的灯丝电流以及灯丝曲线多项式进行推算校准，减少了人为测量次数，降低了人工成本和人为测量平均误差。通过康达C臂X线光机KD-C5000实验验证表明，此方法可节约75%的管电流校准时间，能将原来20%的平均误差降低到2%左右。
Abstract:
Abstract: The problem of tube current drift in the bulb of medical X-ray equipment affects the quality of image construction and the accuracy of patient examinations, and is generally calibrated by multiple human measurements in engineering, which is low in accuracy and high cost. Herein, it is proposed to map the filament characteristic curves of the new and old tubes by controlling variables. According to the change law of tube current polynomials, the Matlab least square polynomial fitting approach is adopted, and the filament current of all exposure points of the spherical tube and the polynomials are calculated and calibrated using the measured tube current of a few exposure points of the spherical tube and the polynomial piecewise translation method, which reduces the frequency of human measurements, labor costs and the average error of human measurements. Through the experimental verification of KD-C5000 of Kangda C-arm, it is showed that the method can save about 75% of the tube current calibration time, and can effectively reduce the average error from the original 20% to about 2%.

相似文献/References:

[1]王艳.X线球管阳极热容量曲线拟合算法[J].中国医学物理学杂志,2015,32(02):214.[doi:10.3969/j.issn.1005-202X.2015.02.014]
[2]余 辉,张书旭.宫颈癌后装治疗剂量的调强优化方法[J].中国医学物理学杂志,2014,31(05):5114.[doi:10.3969/j.issn.1005-202X.2014.05.004]
[3]胡超,葛云,陈颖.人体关节活动度测量系统[J].中国医学物理学杂志,2016,33(1):34.[doi:DOI:10.3969/j.issn.1005-202X.2016.01.008]
　[J].Chinese Journal of Medical Physics,2016,33(4):34.[doi:DOI:10.3969/j.issn.1005-202X.2016.01.008]
[4]王艳,王远军,聂生东.医用诊断X射线源的研究进展[J].中国医学物理学杂志,2018,35(10):1214.[doi:DOI:10.3969/j.issn.1005-202X.2018.10.020]
　WANG Yan,WANG Yuanjun,NIE Shengdong.Research progress in medical diagnostic X-ray sources[J].Chinese Journal of Medical Physics,2018,35(4):1214.[doi:DOI:10.3969/j.issn.1005-202X.2018.10.020]

备注/Memo

备注/Memo:
【收稿日期】2022-10-26 【基金项目】南充市市校科技战略合作项目（20SXQT0139）；川北医学院校级科研发展青年项目（CBY20QAY04） 【作者简介】杜凡宇，讲师，博士研究生，主要研究方向为医疗设备、医学人工智能，E-mail: fydu@nsmc.edu.cn
更新日期/Last Update: 2023-04-25