相似文献/References:
[1]方兆山,刘星星.3D打印在肝脏外科应用的研究进展[J].中国医学物理学杂志,2015,32(03):374.[doi:10.3969/j.issn.1005-202X.2015.03.016]
[2]王遥,霍万里,熊壮,等.TACE手术中不同站姿下铅眼镜和铅面罩对医生眼晶状体防护效果的蒙特卡洛模拟比较[J].中国医学物理学杂志,2016,33(6):553.[doi:DOI:10.3969/j.issn.1005-202X.2016.06.003]
[J].Chinese Journal of Medical Physics,2016,33(12):553.[doi:DOI:10.3969/j.issn.1005-202X.2016.06.003]
[3]张新,谷晓芳,王培臣,等.轻离子束治疗设备注册检验关键技术问题[J].中国医学物理学杂志,2016,33(6):559.[doi:10.3969/j.issn.1005-202X.2016.06.004]
[J].Chinese Journal of Medical Physics,2016,33(12):559.[doi:10.3969/j.issn.1005-202X.2016.06.004]
[4]江芬芬,王培,康盛伟,等. 热释光剂量片测量肺部肿瘤放疗剂量的方法[J].中国医学物理学杂志,2016,33(6):564.[doi:10.3969/j.issn.1005-202X.2016.06.005]
[J].Chinese Journal of Medical Physics,2016,33(12):564.[doi:10.3969/j.issn.1005-202X.2016.06.005]
[5]刘洪源,彭威,杨锐,等. 锥形束CT离线校正肺癌摆位误差[J].中国医学物理学杂志,2016,33(6):573.[doi:10.3969/j.issn.1005-202X.2016.06.007]
[J].Chinese Journal of Medical Physics,2016,33(12):573.[doi:10.3969/j.issn.1005-202X.2016.06.007]
[6]赵彪,潘香,杨毅,等. 右乳癌保乳术后瘤床同步X线和后程电子线补量调强放疗剂量学比较[J].中国医学物理学杂志,2016,33(6):576.[doi:10.3969/j.issn.1005-202X.2016.06.008]
[J].Chinese Journal of Medical Physics,2016,33(12):576.[doi:10.3969/j.issn.1005-202X.2016.06.008]
[7]邓南,钱建庭,刁现芬,等. 基于宽带检测放疗X-光光声效应仿体实验[J].中国医学物理学杂志,2016,33(9):865.[doi:DOI:10.3969/j.issn.1005-202X.2016.09.001]
[J].Chinese Journal of Medical Physics,2016,33(12):865.[doi:DOI:10.3969/j.issn.1005-202X.2016.09.001]
[8]张先稳,李军,张西志,等. 宫颈癌术后5野调强放疗4个变量组合的最佳治疗模式的剂量学[J].中国医学物理学杂志,2016,33(9):872.[doi:10.3969/j.issn.1005-202X.2016.09.002]
[J].Chinese Journal of Medical Physics,2016,33(12):872.[doi:10.3969/j.issn.1005-202X.2016.09.002]
[9]胡健,李承军,徐利明,等. 床面倾斜对剂量验证通过率的影响[J].中国医学物理学杂志,2016,33(9):881.[doi:10.3969/j.issn.1005-202X.2016.09.003]
[J].Chinese Journal of Medical Physics,2016,33(12):881.[doi:10.3969/j.issn.1005-202X.2016.09.003]
[10]陈亚正,肖明勇,孙春堂,等. 准直器角度对宫颈癌术后VMAT计划的影响[J].中国医学物理学杂志,2016,33(9):885.[doi:10.3969/j.issn.1005-202X.2016.09.004]
[J].Chinese Journal of Medical Physics,2016,33(12):885.[doi:10.3969/j.issn.1005-202X.2016.09.004]
[11]杨环,杨如飞,朱华昭,等. 基于组织等效3D打印的多模椎骨体模设计[J].中国医学物理学杂志,2016,33(9):924.[doi:10.3969/j.issn.1005-202X.2016.09.011]
[J].Chinese Journal of Medical Physics,2016,33(12):924.[doi:10.3969/j.issn.1005-202X.2016.09.011]
[12]许靖,黄文华. 3D打印技术在人工手指关节置换中的应用现状[J].中国医学物理学杂志,2017,34(9):950.[doi:DOI:10.3969/j.issn.1005-202X.2017.09.018]
[J].Chinese Journal of Medical Physics,2017,34(12):950.[doi:DOI:10.3969/j.issn.1005-202X.2017.09.018]
[13]廖政文,莫诒向,张国栋,等.3D打印个性化康复矫形器的设计制作[J].中国医学物理学杂志,2018,35(4):470.[doi:DOI:10.3969/j.issn.1005-202X.2018.04.019]
LIAO Zhengwen,MO Yixiang,ZHANG Guodong,et al. Design and development of three-dimensional printing personalized rehabilitation orthosis[J].Chinese Journal of Medical Physics,2018,35(12):470.[doi:DOI:10.3969/j.issn.1005-202X.2018.04.019]
[14]张才铭,高晓盈,吴祖培,等. 3D打印重度肋骨骨折模型的临床应用[J].中国医学物理学杂志,2018,35(8):983.[doi:DOI:10.3969/j.issn.1005-202X.2018.08.022]
ZHANG Caiming,GAO Xiaoying,WU Zupei,et al. Clinical application of three-dimensional printed severe rib fracture model[J].Chinese Journal of Medical Physics,2018,35(12):983.[doi:DOI:10.3969/j.issn.1005-202X.2018.08.022]
[15]王艺霖,张才铭,黄文华. 3D打印技术在乳腺外科的应用及展望[J].中国医学物理学杂志,2018,35(11):1351.[doi:DOI:10.3969/j.issn.1005-202X.2018.11.021]
WANG Yilin,,et al. Application of three-dimensional printing technology in breast surgery and its prospects[J].Chinese Journal of Medical Physics,2018,35(12):1351.[doi:DOI:10.3969/j.issn.1005-202X.2018.11.021]
[16]殷俊飞扬,钟静,陈莉智,等. 3D打印技术在颌面整形外科的应用进展[J].中国医学物理学杂志,2018,35(12):1479.[doi:DOI:10.3969/j.issn.1005-202X.2018.12.021]
YIN Junfeiyang,,et al. Application progress of 3D printing technology in maxillofacial plastic surgery[J].Chinese Journal of Medical Physics,2018,35(12):1479.[doi:DOI:10.3969/j.issn.1005-202X.2018.12.021]
[17]林林,陈莉智,黄文华,等. 3D打印技术在骨科关节中的应用进展[J].中国医学物理学杂志,2019,36(1):121.[doi:DOI:10.3969/j.issn.1005-202X.2019.01.024]
LIN Lin,CHEN Lizhi,HUANG Wenhua,et al. Application progress of three-dimensional printing in orthopedic joints[J].Chinese Journal of Medical Physics,2019,36(12):121.[doi:DOI:10.3969/j.issn.1005-202X.2019.01.024]
[18]周驰雨,张莹,初同伟. 计算机辅助术前矫正模型设计结合3D打印技术在脊柱畸形治疗中的应用[J].中国医学物理学杂志,2019,36(2):185.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.012]
ZHOU Chiyu,ZHANG Ying,CHU Tongwei. Application of computer-assisted preoperative correction model design combined with 3D printing technology in the treatment of spinal deformities[J].Chinese Journal of Medical Physics,2019,36(12):185.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.012]
[19]谢雨杉,汪艳芳,黄文华. 医学3D打印技术在视网膜修复的研究进展[J].中国医学物理学杂志,2019,36(2):234.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.021]
XIE Yushan,WANG Yanfang,HUANG Wenhua,et al. Research progress on 3D printing technology in retinal repair[J].Chinese Journal of Medical Physics,2019,36(12):234.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.021]
[20]邓亚军,解琪琪,李文洲,等. 3D打印技术在脊柱外科的应用进展[J].中国医学物理学杂志,2019,36(3):360.[doi:DOI:10.3969/j.issn.1005-202X.2019.03.023]
DENG Yajun,XIE Qiqi,et al. Progress on application of 3D printing technology in spinal surgery[J].Chinese Journal of Medical Physics,2019,36(12):360.[doi:DOI:10.3969/j.issn.1005-202X.2019.03.023]