[1]黄吉军,张恒柱,王永祥,等.正常颈椎有限元模型建立及有效性验证[J].中国医学物理学杂志,2023,40(4):487-495.[doi:DOI:10.3969/j.issn.1005-202X.2023.04.015]
　HUANG Jijun,ZHANG Hengzhu,et al.Establishment and validity verification of a finite element model of normal cervical spine[J].Chinese Journal of Medical Physics,2023,40(4):487-495.[doi:DOI:10.3969/j.issn.1005-202X.2023.04.015]
点击复制

正常颈椎有限元模型建立及有效性验证()
分享到：

《中国医学物理学杂志》[ISSN:1005-202X/CN:44-1351/R]

卷:
40卷
期数:
2023年第4期
页码:
487-495
栏目:
生物材料与力学
出版日期:
2023-04-25

文章信息/Info

Title:
Establishment and validity verification of a finite element model of normal cervical spine
文章编号:
1005-202X（2023）04-0487-09
作者:
黄吉军1; 2; 张恒柱2; 3; 王永祥1; 张文东1; 严正村3
1.扬州大学临床医学院脊柱外科， 江苏?州225001；?苏州大学附属第二医院神经外科， 江苏?州215000； 3.扬州大学临床医学院神经外科， 江苏?州225001
Author(s):
HUANG Jijun1;  2;  ZHANG Hengzhu2;  3;  WANG Yongxiang1;  ZHANG Wendong1;  YAN Zhengcun3
1. Department of Spine Surgery, Clinical Medical College, Yangzhou University, Yangzhou 225001, China 2. Department of Neurosurgery, the Second Affiliated Hospital of Soochow University, Suzhou 215000, China 3. Department of Neurosurgery, Clinical Medical College, Yangzhou University, Yangzhou 225001, China
关键词:
颈椎; 椎间盘; 有限元分析; 生物力学
Keywords:
Keywords: cervical spine intervertebral disc finite element analysis biomechanics
分类号:
R318
DOI:
DOI:10.3969/j.issn.1005-202X.2023.04.015
文献标志码:
A
摘要:
目的：建立颈椎C2~C7节段三维有限元模型，分析模型的生物力学特征，进行有效性验证。方法：招募一名健康志愿者为建模对象，利用64排螺旋CT进行颈椎连续性断层扫描，扫描区域设定为枕骨至C7椎体节段。将获得的图像数据DICOM文件导入至Mimics图像分割软件中，对颈椎骨性结构进行分割提取。在Geomagic studio软件中对获得的颈椎骨性结构模型进行去噪、光顺、修补填充等处理，拟合曲面实体，并偏移分割生成皮质骨与松质骨，将模型保存为STEP文件。在Solidworks软件中完成椎间盘髓核、纤维环及关节软骨结构的建立与模型的组装匹配。ANSYS Workbench软件中添加材料属性、接触关系、边界条件及载荷，测量颈椎在前屈、后伸、左右侧弯、左右旋转6种应力作用下位移变化。结果：成功建立颈椎C2~C7节段有限元模型，颈椎C2~C3屈伸、侧屈、旋转角度位移分别为7.2°、8.2°、5.3°，颈椎C3~C4屈伸、侧屈、旋转角度位移分别为7.2°、8.1°、6.2°，颈椎C4~C5屈伸、侧屈、旋转角度位移分别为8.1°、7.9°、7.8°，颈椎C5~C6屈伸、侧屈、旋转角度位移分别为6.9°、5.4°、5.2°，颈椎C6~C7屈伸、侧屈、旋转角度位移分别为5.7°、4.8°、3.7°，和既往颈椎生物力学模型测试结果基本一致。结论：本研究基于有限元建模软件成功建立正常颈椎有限元模型，该方法所建立的模型可靠，通过有效性验证，具备良好的生物力学性能。
Abstract:
Abstract: Objective To establish a three-dimensional finite element model of cervical vertebrae C2-C7, and analyze its biomechanical characteristics for validity verification. Methods A healthy volunteer was recruited as the modeling object. The continuous CT scan of cervical spine was carried out with 64-slice spiral CT, with the scanning area set as the occipital bone to C7 vertebral vertebra. The DICOM files of the obtained images data were imported into Mimics image segmentation software for extracting the bony structure of cervical spine. After the cervical bony structure model was processed with Geomagic studio software (such as de-denoising, smoothing, patching and filling), curved solid was fitted and offset to generate cortical bone and cancellous bone, and the results were saved as STEP files. The establishments of nucleus pulposus, fibrous ring and articular cartilage, and the assembly and matching of models were completed in SolidWorks. The material properties, contact relationships, boundary conditions, and loads were assigned using Ansys Workbench. The displacements of cervical spine were measured under 6 kinds of stresses: forward flexion, backward extension, left and right lateral flexions, and left and right rotations. Results The finite element model of C2-C7 cervical vertebrae was successfully established. The angular displacements of C2-C3 in flexion and extension, lateral flexion, and rotation were 7.2°, 8.2° and 5.3°, respectively, and those were 7.2°, 8.1°, 6.2° for C3-C4, 8.1°, 7.9°, 7.8° for C4-C5, 6.9°, 5.4°, 5.2° for C5-C6, 5.7°, 4.8°, 3.7° for C6-C7, which were basically consistent with the previous biomechanical model test reports. Conclusion The finite element model of the normal cervical spine can be successfully established using finite element modeling software. The validation shows that the established model is reliable, with good biomechanical properties.

相似文献/References:

[1]徐波,张美超,赵卫东,等.Prestige~(TM)-LP颈椎人工椎间盘置换后椎体应力及关节突关节间压力有限元分析[J].中国医学物理学杂志,2013,30(04):4311.[doi:10.3969/j.issn.1005-202X.2013.04.022]
[2]赵希云,温萌,高国栋,等.腰椎间盘退行性变及不同载荷影响的生物力学研究进展[J].中国医学物理学杂志,2023,40(8):1026.[doi:DOI:10.3969/j.issn.1005-202X.2023.08.017]
　ZHAO Xiyun,WEN Meng,et al.Biomechanical research progress on lumbar intervertebral disc degeneration and effects of different loads[J].Chinese Journal of Medical Physics,2023,40(4):1026.[doi:DOI:10.3969/j.issn.1005-202X.2023.08.017]

备注/Memo

备注/Memo:
【收稿日期】2022-10-26 【基金项目】国家自然科学资金（82072423） 【作者简介】黄吉军，博士在读，主要研究方向：脊柱生物力学，E-mail: 20184133136@stu.suda.edu.cn 【通信作者】张恒柱，研究方向：脊柱生物力学、神经系统肿瘤，E-mail: zhanghengzhu@sina.com
更新日期/Last Update: 2023-04-25