[1]林林,陈莉智,黄文华,等. 3D打印技术在骨科关节中的应用进展[J].中国医学物理学杂志,2019,36(1):121-124.[doi:DOI:10.3969/j.issn.1005-202X.2019.01.024]
　LIN Lin,CHEN Lizhi,HUANG Wenhua,et al. Application progress of three-dimensional printing in orthopedic joints[J].Chinese Journal of Medical Physics,2019,36(1):121-124.[doi:DOI:10.3969/j.issn.1005-202X.2019.01.024]
点击复制

 3D打印技术在骨科关节中的应用进展()
分享到：

《中国医学物理学杂志》[ISSN:1005-202X/CN:44-1351/R]

卷:
36卷
期数:
2019年第1期
页码:
121-124
栏目:
生物材料与力学
出版日期:
2019-01-25

文章信息/Info

Title:
 Application progress of three-dimensional printing in orthopedic joints
文章编号:
1005-202X（2019）01-0121-04
作者:
 林林1; 陈莉智2; 黄文华1; 2; 3; 曾春1
 1.南方医科大学第三附属医院， 广东 广州 510630； 2.南方医科大学基础医学院人体解剖学国家重点学科， 广东 广州 510515；
3.广东省医学3D打印应用转化工程技术研究中心， 广东 广州 510030
Author(s):
 LIN Lin1;  CHEN Lizhi2;  HUANG Wenhua1;  2;  3;  ZENG Chun1
1. The Third Affiliated Hospital of Southern Medical University, Guangzhou 510630, China; 2. National Key Disciplines of Human Anatomy, School of Basic Medical Sciences, Southern Medical University, Guangzhou 510515, China; 3. Guangdong Province Medical 3D Printing Application Transformation Engineering Research Center, Guangzhou 510030, China
关键词:
 ; 3D打印; 骨科关节; 关节置换; 骨关节软骨修复; 综述
Keywords:
Keywords: three-dimensional printing;  orthopedic joint;  joint replacement;  osteoarticular cartilage repair;  review
分类号:
R318
DOI:
DOI:10.3969/j.issn.1005-202X.2019.01.024
文献标志码:
A
摘要:
 【摘要】随着新材料技术的不断发展，3D打印技术在骨科关节领域中的应用越来越广泛。本文综述了3D打印技术在骨科关节中的研究进展，分别介绍了3D打印在解剖学教育、医生和患者及其家属的术前沟通、临床治疗方案设计的应用，并对关节置换和骨关节软骨修复在组织工程领域的进展进行了阐述。最后，对3D打印技术在该领域未来的机遇和挑战进行了预测。
Abstract:
 Abstract: With the continuous development of novel material and technology, three-dimensional (3D) printing has been more and more widely applied in orthopedic joints. Based on the research progress of 3D printing in orthopedic joints, the applications of 3D printing in anatomy education, preoperative communication among doctors and patients and their families, and planning of treatment strategies are introduced. Furthermore, the developments of joint replacement and osteoarticular cartilage repair in the tissue engineering are prospected. Finally, the opportunities and challenges of 3D printing in this field are predicted.

相似文献/References:

[1]方兆山,刘星星.3D打印在肝脏外科应用的研究进展[J].中国医学物理学杂志,2015,32(03):374.[doi:10.3969/j.issn.1005-202X.2015.03.016]
[2]王遥,霍万里,熊壮,等.TACE手术中不同站姿下铅眼镜和铅面罩对医生眼晶状体防护效果的蒙特卡洛模拟比较[J].中国医学物理学杂志,2016,33(6):553.[doi:DOI:10.3969/j.issn.1005-202X.2016.06.003]
　[J].Chinese Journal of Medical Physics,2016,33(1):553.[doi:DOI:10.3969/j.issn.1005-202X.2016.06.003]
[3]张新,谷晓芳,王培臣,等.轻离子束治疗设备注册检验关键技术问题[J].中国医学物理学杂志,2016,33(6):559.[doi:10.3969/j.issn.1005-202X.2016.06.004]
　[J].Chinese Journal of Medical Physics,2016,33(1):559.[doi:10.3969/j.issn.1005-202X.2016.06.004]
[4]江芬芬,王培,康盛伟,等. 热释光剂量片测量肺部肿瘤放疗剂量的方法[J].中国医学物理学杂志,2016,33(6):564.[doi:10.3969/j.issn.1005-202X.2016.06.005]
　[J].Chinese Journal of Medical Physics,2016,33(1):564.[doi:10.3969/j.issn.1005-202X.2016.06.005]
[5]刘洪源,彭威,杨锐,等. 锥形束CT离线校正肺癌摆位误差[J].中国医学物理学杂志,2016,33(6):573.[doi:10.3969/j.issn.1005-202X.2016.06.007]
　[J].Chinese Journal of Medical Physics,2016,33(1):573.[doi:10.3969/j.issn.1005-202X.2016.06.007]
[6]赵彪,潘香,杨毅,等. 右乳癌保乳术后瘤床同步X线和后程电子线补量调强放疗剂量学比较[J].中国医学物理学杂志,2016,33(6):576.[doi:10.3969/j.issn.1005-202X.2016.06.008]
　[J].Chinese Journal of Medical Physics,2016,33(1):576.[doi:10.3969/j.issn.1005-202X.2016.06.008]
[7]邓南,钱建庭,刁现芬,等. 基于宽带检测放疗X-光光声效应仿体实验[J].中国医学物理学杂志,2016,33(9):865.[doi:DOI:10.3969/j.issn.1005-202X.2016.09.001]
　[J].Chinese Journal of Medical Physics,2016,33(1):865.[doi:DOI:10.3969/j.issn.1005-202X.2016.09.001]
[8]张先稳,李军,张西志,等. 宫颈癌术后5野调强放疗4个变量组合的最佳治疗模式的剂量学[J].中国医学物理学杂志,2016,33(9):872.[doi:10.3969/j.issn.1005-202X.2016.09.002]
　[J].Chinese Journal of Medical Physics,2016,33(1):872.[doi:10.3969/j.issn.1005-202X.2016.09.002]
[9]胡健,李承军,徐利明,等. 床面倾斜对剂量验证通过率的影响[J].中国医学物理学杂志,2016,33(9):881.[doi:10.3969/j.issn.1005-202X.2016.09.003]
　[J].Chinese Journal of Medical Physics,2016,33(1):881.[doi:10.3969/j.issn.1005-202X.2016.09.003]
[10]陈亚正,肖明勇,孙春堂,等. 准直器角度对宫颈癌术后VMAT计划的影响[J].中国医学物理学杂志,2016,33(9):885.[doi:10.3969/j.issn.1005-202X.2016.09.004]
　[J].Chinese Journal of Medical Physics,2016,33(1):885.[doi:10.3969/j.issn.1005-202X.2016.09.004]
[11]杨环,杨如飞,朱华昭,等. 基于组织等效3D打印的多模椎骨体模设计[J].中国医学物理学杂志,2016,33(9):924.[doi:10.3969/j.issn.1005-202X.2016.09.011]
　[J].Chinese Journal of Medical Physics,2016,33(1):924.[doi:10.3969/j.issn.1005-202X.2016.09.011]
[12]钟静,黄文华. 3D打印技术辅助耳修复手术的研究进展[J].中国医学物理学杂志,2016,33(12):1286.[doi:10.3969/j.issn.1005-202X.2016.12.023]
　[J].Chinese Journal of Medical Physics,2016,33(1):1286.[doi:10.3969/j.issn.1005-202X.2016.12.023]
[13]许靖,黄文华. 3D打印技术在人工手指关节置换中的应用现状[J].中国医学物理学杂志,2017,34(9):950.[doi:DOI:10.3969/j.issn.1005-202X.2017.09.018]
　[J].Chinese Journal of Medical Physics,2017,34(1):950.[doi:DOI:10.3969/j.issn.1005-202X.2017.09.018]
[14]廖政文,莫诒向,张国栋,等.3D打印个性化康复矫形器的设计制作[J].中国医学物理学杂志,2018,35(4):470.[doi:DOI:10.3969/j.issn.1005-202X.2018.04.019]
　LIAO Zhengwen,MO Yixiang,ZHANG Guodong,et al. Design and development of three-dimensional printing personalized rehabilitation orthosis[J].Chinese Journal of Medical Physics,2018,35(1):470.[doi:DOI:10.3969/j.issn.1005-202X.2018.04.019]
[15]张才铭,高晓盈,吴祖培,等. 3D打印重度肋骨骨折模型的临床应用[J].中国医学物理学杂志,2018,35(8):983.[doi:DOI:10.3969/j.issn.1005-202X.2018.08.022]
　ZHANG Caiming,GAO Xiaoying,WU Zupei,et al. Clinical application of three-dimensional printed severe rib fracture model[J].Chinese Journal of Medical Physics,2018,35(1):983.[doi:DOI:10.3969/j.issn.1005-202X.2018.08.022]
[16]王艺霖,张才铭,黄文华. 3D打印技术在乳腺外科的应用及展望[J].中国医学物理学杂志,2018,35(11):1351.[doi:DOI:10.3969/j.issn.1005-202X.2018.11.021]
　WANG Yilin,,et al. Application of three-dimensional printing technology in breast surgery and its prospects[J].Chinese Journal of Medical Physics,2018,35(1):1351.[doi:DOI:10.3969/j.issn.1005-202X.2018.11.021]
[17]殷俊飞扬,钟静,陈莉智,等. 3D打印技术在颌面整形外科的应用进展[J].中国医学物理学杂志,2018,35(12):1479.[doi:DOI:10.3969/j.issn.1005-202X.2018.12.021]
　YIN Junfeiyang,,et al. Application progress of 3D printing technology in maxillofacial plastic surgery[J].Chinese Journal of Medical Physics,2018,35(1):1479.[doi:DOI:10.3969/j.issn.1005-202X.2018.12.021]
[18]周驰雨,张莹,初同伟. 计算机辅助术前矫正模型设计结合3D打印技术在脊柱畸形治疗中的应用[J].中国医学物理学杂志,2019,36(2):185.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.012]
　ZHOU Chiyu,ZHANG Ying,CHU Tongwei. Application of computer-assisted preoperative correction model design combined with 3D printing technology in the treatment of spinal deformities[J].Chinese Journal of Medical Physics,2019,36(1):185.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.012]
[19]谢雨杉,汪艳芳,黄文华. 医学3D打印技术在视网膜修复的研究进展[J].中国医学物理学杂志,2019,36(2):234.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.021]
　XIE Yushan,WANG Yanfang,HUANG Wenhua,et al. Research progress on 3D printing technology in retinal repair[J].Chinese Journal of Medical Physics,2019,36(1):234.[doi:DOI:10.3969/j.issn.1005-202X.2019.02.021]
[20]邓亚军,解琪琪,李文洲,等. 3D打印技术在脊柱外科的应用进展[J].中国医学物理学杂志,2019,36(3):360.[doi:DOI:10.3969/j.issn.1005-202X.2019.03.023]
　DENG Yajun,XIE Qiqi,et al. Progress on application of 3D printing technology in spinal surgery[J].Chinese Journal of Medical Physics,2019,36(1):360.[doi:DOI:10.3969/j.issn.1005-202X.2019.03.023]

备注/Memo

备注/Memo:
 【收稿日期】2018-06-11
【基金项目】国家重点研发计划（2017YFC1103403）；广东省科技计划项目（2017B090912006，2016B090917001）
【作者简介】林林，硕士在读，研究方向：医学3D、打印骨科关节，E-mail:245823771@qq.com
【通信作者】曾春，副教授，研究生导师，研究方向：数字医学、骨科关节,E-mail: zendavid@126.com
更新日期/Last Update: 2019-01-25