[1]彭舸,云忠,孙曙明,等. 外磁驱动轴流式血泵磁场分布及红细胞电磁特性分析[J].中国医学物理学杂志,2018,35(4):455-460.[doi:DOI:10.3969/j.issn.1005-202X.2018.04.016]
　PENG Ge,YUN Zhong,SUN Shuming,et al. Electromagnetic characteristics of outside magnetic driving axial flow blood pump and peripheral red blood cells[J].Chinese Journal of Medical Physics,2018,35(4):455-460.[doi:DOI:10.3969/j.issn.1005-202X.2018.04.016]
点击复制

 外磁驱动轴流式血泵磁场分布及红细胞电磁特性分析()
分享到：

《中国医学物理学杂志》[ISSN:1005-202X/CN:44-1351/R]

卷:
35卷
期数:
2018年第4期
页码:
455-460
栏目:
医学生物物理
出版日期:
2018-04-21

文章信息/Info

Title:
 Electromagnetic characteristics of outside magnetic driving axial flow blood pump and peripheral red blood cells
文章编号:
1005-202X（2018）04-0455-06
作者:
 彭舸; 云忠; 孙曙明; 胡及雨; 董喆
 中南大学机电工程学院， 湖南 长沙 410083
Author(s):
 PENG Ge;  YUN Zhong;  SUN Shuming;  HU Jiyu;  DONG Zhe
 School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
关键词:
 ; 轴流式血泵; 电磁场; 红细胞; 优化设计; 损伤
Keywords:
 ; axial flow blood pump;  electromagnetic field;  red blood cells;  optimized design;  damage
分类号:
R318.1
DOI:
DOI:10.3969/j.issn.1005-202X.2018.04.016
文献标志码:
A
摘要:
 外磁驱动轴流式血泵较强的磁场强度会对血液及周围组织细胞产生影响，因此对血泵及其周围红细胞进行电磁场理论计算和仿真分析。利用ANSYS Electronics Desktop中3D瞬态磁场模块对血泵进行瞬态磁场仿真，用理论方法建立细胞膜磁场分布模型，综合利用3D瞬态电场和磁场模块对红细胞膜及其内外电磁场进行研究。给出了血泵稳定状态时的3D和2D磁感应强度分布云图，得到了细胞膜受到的最大磁感应强度值；通过最大磁感应强度值和血泵工况特点得到红细胞膜电场时域上的分布规律和幅值；综合细胞膜静息电位得到细胞膜电场耦合分布规律；基于以上条件求得细胞膜上感应磁场分布及细胞膜所受最大磁场力。尽管钕铁硼材料剩余磁感应强度很大，但血液和红细胞所受最大磁感应强度值仅为812 mT。由此得到的各项红细胞电磁特性参数值可为红细胞受驱动磁场影响下受到的电磁损伤和血泵的临床应用以及优化设计提供理论基础。
Abstract:
 The strong magnetic induction intensity of outside magnetic driving axial flow blood pump has an effect on the blood and surrounding tissues and cells. Therefore, performing a theoretical calculation and simulation analysis for the electromagnetic field of the blood pump and peripheral red blood cells is necessary. Herein we use three-dimensional (3D) transient magnetic field module in ANSYS Electronics Desktop to simulate the transient magnetic field, and establish the model of magnetic field distribution in the cell membrane with theoretical method. Subsequently, 3D transient electric field in combination with magnetic field module is applied to analyze the red cell membrane and its internal and external electromagnetic fields. The 3D and two-dimensional magnetic induction intensity distributions with blood pump in the steady state are given and the maximum magnetic induction intensity acting on the cell membrane is obtained. According to the maximum magnetic induction intensity and the characteristics of blood pump, we obtained the distribution law and amplitude of the electric fields of red cell membrane in time domain. The electric field coupling distribution of the cell membrane is obtained by comprehensively considering the resting potential of the cell membrane. Based on the above-mentioned conditions, the induction magnetic field distribution of the cell membrane and the maximum magnetic field force on the cell membrane are able to be calculated. Despite the great residual magnetic induction of NdFeB materials, the maximum magnetic induction intensity acting on blood and red blood cells is only 812 mT. The electromagnetic properties of red blood cells provide the theoretical basis for the analysis of electromagnetic damages to red blood cells under the influence of the driven magnetic field, as well as the clinical application and the optimal design of the blood pump structure.

相似文献/References:

[1]王遥,霍万里,熊壮,等.TACE手术中不同站姿下铅眼镜和铅面罩对医生眼晶状体防护效果的蒙特卡洛模拟比较[J].中国医学物理学杂志,2016,33(6):553.[doi:DOI:10.3969/j.issn.1005-202X.2016.06.003]
　[J].Chinese Journal of Medical Physics,2016,33(4):553.[doi:DOI:10.3969/j.issn.1005-202X.2016.06.003]
[2]张新,谷晓芳,王培臣,等.轻离子束治疗设备注册检验关键技术问题[J].中国医学物理学杂志,2016,33(6):559.[doi:10.3969/j.issn.1005-202X.2016.06.004]
　[J].Chinese Journal of Medical Physics,2016,33(4):559.[doi:10.3969/j.issn.1005-202X.2016.06.004]
[3]江芬芬,王培,康盛伟,等. 热释光剂量片测量肺部肿瘤放疗剂量的方法[J].中国医学物理学杂志,2016,33(6):564.[doi:10.3969/j.issn.1005-202X.2016.06.005]
　[J].Chinese Journal of Medical Physics,2016,33(4):564.[doi:10.3969/j.issn.1005-202X.2016.06.005]
[4]刘洪源,彭威,杨锐,等. 锥形束CT离线校正肺癌摆位误差[J].中国医学物理学杂志,2016,33(6):573.[doi:10.3969/j.issn.1005-202X.2016.06.007]
　[J].Chinese Journal of Medical Physics,2016,33(4):573.[doi:10.3969/j.issn.1005-202X.2016.06.007]
[5]赵彪,潘香,杨毅,等. 右乳癌保乳术后瘤床同步X线和后程电子线补量调强放疗剂量学比较[J].中国医学物理学杂志,2016,33(6):576.[doi:10.3969/j.issn.1005-202X.2016.06.008]
　[J].Chinese Journal of Medical Physics,2016,33(4):576.[doi:10.3969/j.issn.1005-202X.2016.06.008]
[6]邓南,钱建庭,刁现芬,等. 基于宽带检测放疗X-光光声效应仿体实验[J].中国医学物理学杂志,2016,33(9):865.[doi:DOI:10.3969/j.issn.1005-202X.2016.09.001]
　[J].Chinese Journal of Medical Physics,2016,33(4):865.[doi:DOI:10.3969/j.issn.1005-202X.2016.09.001]
[7]张先稳,李军,张西志,等. 宫颈癌术后5野调强放疗4个变量组合的最佳治疗模式的剂量学[J].中国医学物理学杂志,2016,33(9):872.[doi:10.3969/j.issn.1005-202X.2016.09.002]
　[J].Chinese Journal of Medical Physics,2016,33(4):872.[doi:10.3969/j.issn.1005-202X.2016.09.002]
[8]胡健,李承军,徐利明,等. 床面倾斜对剂量验证通过率的影响[J].中国医学物理学杂志,2016,33(9):881.[doi:10.3969/j.issn.1005-202X.2016.09.003]
　[J].Chinese Journal of Medical Physics,2016,33(4):881.[doi:10.3969/j.issn.1005-202X.2016.09.003]
[9]陈亚正,肖明勇,孙春堂,等. 准直器角度对宫颈癌术后VMAT计划的影响[J].中国医学物理学杂志,2016,33(9):885.[doi:10.3969/j.issn.1005-202X.2016.09.004]
　[J].Chinese Journal of Medical Physics,2016,33(4):885.[doi:10.3969/j.issn.1005-202X.2016.09.004]
[10]李毅,唐丰文,张晓智. 基于四维CT和锥形束CT确定非小细胞肺癌放疗靶区外放边界[J].中国医学物理学杂志,2016,33(9):892.[doi:10.3969/j.issn.1005-202X.2016.09.005]
　[J].Chinese Journal of Medical Physics,2016,33(4):892.[doi:10.3969/j.issn.1005-202X.2016.09.005]
[11]胡及雨,云忠,向闯,等. 轴流血泵电机温度场分析及其对血液和组织的损伤[J].中国医学物理学杂志,2017,34(12):1254.[doi:DOI:10.3969/j.issn.1005-202X.2017.12.013]
　HU Jiyu,YUN Zhong,XIANG Chuang,et al. Temperature field analysis for axial flow blood pump motor and damages of increased motor temperature to blood and tissue[J].Chinese Journal of Medical Physics,2017,34(4):1254.[doi:DOI:10.3969/j.issn.1005-202X.2017.12.013]

备注/Memo

备注/Memo:
 【收稿日期】2017-11-24
【基金项目】国家自然科学基金（31670999，51475477）;浙江省重中之重学科开放基金重点资助项目（GK170201201003/002）
【作者简介】彭舸，硕士研究生，主要研究方向：微生物机械系统设计及仿真，E-mail: qxingjian@qq.com
【通信作者】云忠，教授，博士生导师，主要研究方向：微生物机械系统设计及仿真、航天及军用结构件3D打印关键技术、机电一体化装置设计，E-mail: yunzhong@126.com
更新日期/Last Update: 2018-04-23